Review Garage Door Specialists
Request Service Request Estimate (828) 584-2297 VISIT US TODAY

ARCHITECTURAL SERIES

by

Aluminum Full-View Doors and Steel Insulated Full-View Doors

Contact us about this product
Email Print Brochure

The perfect choice for architectural applications that require open visibility

Clopay’s full-view series doors are ideal for commercial buildings requiring visibility, access to natural lighting and modern look. They're the perfect choice for everything from restaurants and fire stations to service stations and car dealerships.

These overhead doors are available with aluminum or steel frame construction, providing options that ensure maximum durability and reliability. Customize your door with a wide variety of window, color, design and performance options.

Download Product Brochure
Models

Aluminum Full-View

Model Thickness Spacing Max Width✭ Max Height✭
904 2-1/8" Equal width & spacing 24'2" 20'0"
903 2-1/8" Equal panel spacing 24'2" 20'0"
902 2-1/8" 44" on center, end panels vary 24'2" 20'0"

✭Maximum Width and Height values listed are Standard sizing.

Insulated Steel Full-View

Model Thickness Emboss Exterior Gauge  Pattern Intellicore R-Value Solid* R-Value w/Glass** Thermal Break Max Width✭ Max Height✭
3729 2" Stucco 27 Minor Ribbed Intellicore Icon 18.4 8.0 Yes 20'2" 18'0"
3728 2" Stucco 27  Flush Intellicore Icon 18.4 8.0 Yes 20'2" 18'0"
3709 1-3/8" Stucco 27  Minor Ribbed Intellicore Icon 12.9 5.9 Yes 18'2" 16'0"
3708 1-3/8" Stucco 27  Flush Intellicore Icon 12.9 5.9 Yes 18'2" 16'0"
3209 2" Stucco 24  Minor Ribbed
9.1 4.4 Yes 20'2" 18'0"
3208 2" Stucco 24  Flush Panel
9.1 4.4 Yes 20'2" 18'0"
3159 1-3/8" Stucco 27  Minor ribbed
6.5 3.4 Yes 18'2" 16'0"
3158 1-3/8" Stucco 27  Flush panel
6.5 3.4 Yes 18'2" 16'0"

*  R-values calculated per DASMA TDS-163 on a solid door

** R-values calculated per DASMA TDS-163 using weighted average with 3/4" insulated glass. 

✭Maximum Width and Height values listed are Standard sizing. 



Page Updated August 7, 2020

Options

CHOOSE YOUR MATERIAL

Aluminum Full-View Doors
Steel Insulated Full-View Doors

ALUMINUM FULL-VIEW DOORS

Design Options:

Glazing Material

CLEAR GLASS
GRAY TINTED GLASS
BRONZE TINTED GLASS
MIRRORED GLASS*
OBSCURE GLASS
WHITE LAMINATE GLASS*
FROSTED GLASS OR ACRYLIC
CLEAR ACRYLIC
GRAY ACRYLIC
WHITE ACRYLIC
CLEAR POLYCARBONATE
BRONZE POLYCARBONATE
ALUMINUM PANEL COLOR MATCH

*Mirrored and laminate not available in 1/2"

Glass thickness available in 1/8", 1/4" and 1/2". Tri-wall polycarbonate thickness available in 1/2" (Model 902/903 Only) and 5/8" (Model 904 Only). Low-E available on insulated glass.

Finishing Options:

COLOR OPTIONS:

CLEAR ALUMINUM (ANODIZED)
CLEAR ALUMINUM (ANODIZED)
STANDARD WHITE
STANDARD WHITE
BRONZE (PAINTED)
BRONZE (PAINTED)
CHOCOLATE (PAINTED)
CHOCOLATE (PAINTED)
BRONZE (ANODIZED)
BRONZE ANODIZED*
BLACK (ANODIZED)
BLACK (ANODIZED)
DARK BRONZE (ANODIZED)
DARK BRONZE ANODIZED*

Custom powder coat, Color Blast®, and anodized finishes available. *Additional cost and lead time may apply. The use of “Bronze (Painted)” is recommended due to slight color variation that may occur during the anodizing process.

Premium finishing options include:

  • RAL color powder coat
  • 187 different powder coat offerings
  • Custom Colors with Color Blast ® Garage Door Paint System
  • Bronze, dark bronze, black or custom color anodized finishing

Performance Options:

Double-end hinge
3” Track
High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3" sealed roller with 5/8" stem.
25,000, 50,000 or 100,000 cycle springs available.
Exhaust port can be cut into any type of solid sectional door. Available in select sizes.
WindCode® reinforcement available up to W2 design pressure (DP) 14 PSF, depending on size. Doors tested 50% greater than DP.
Upgrade your standard door with industrial-grade components.

Custom Options:

carry-away
Carry-away, roll-away or swing-up mullions are available on select sizes.

STEEL FULL-VIEW DOORS

Design Options:

WINDOWS:

  • 19.5” x 16”
  • 42” x 16”
  • 1/8” Tempered
  • 1/8” Tempered Frosted
  • ¾” Insulated Tempered
  • ¾” Insulated Frosted Tempered

Finishing Options:

STANDARD COLORS:

STANDARD WHITE
STANDARD WHITE
CHOCOLATE
CHOCOLATE
BLACK
BLACK
GRAY
GRAY
TRINAR® WHITE
TRINAR® WHITE
View Full color Options

Premium finishing options include:

  • Custom Colors with Color Blast ® Garage Door Paint System
  • Bronze, dark bronze, black or custom color anodized finishing

Performance Options:

Double-end hinge
3” Track
High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3" sealed roller with 5/8" stem.
25,000, 50,000 or 100,000 cycle springs available.
Exhaust port can be cut into any type of solid sectional door. Available in select sizes.
WindCode® reinforcement available up to W1 design pressure (DP) 14 PSF, depending on size. Doors tested 50% greater than DP.
Upgrade your standard door with industrial-grade components.

Custom Options:

carry-away
Carry-away, roll-away or swing-up mullions are available on select sizes.
carry-away
Break-away sections

Safe-T-Stop™ Chain Hoist

Safe-T-Stop™ Chain Hoist 
A controlled descent sectional door hand hoist with an integral braking system allowing users to operate the door with confidence.
Features & Benefits

CHOOSE YOUR MATERIAL

Jump to Aluminum Full-View Doors
Jump to Steel Insulated Full-View Doors

Aluminum Full-View Doors

MODEL 904
Exterior Skin Pattern: Recessed aluminum panel
Exterior Aluminum Gauge: 6063-T5 Aluminum
Colors: Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized)
Warranty: Limited 5-year finish / 1-year material and workmanship

Made of 2-1/8” durable commercial grade aluminum, making it virtually maintenance-free and long-lasting.
Tongue-and-groove with integral joint seal for further reduction of air and water infiltration.
Smooth flat frame edge design for a more contemporary look.
Reinforcing fin included on doors wider than 14’. Doors 12’ and under do not use built-in reinforcing fin. Usage on widths 12’2” to 14’ depend upon glass weight. WINDCODE® doors may vary.

MODEL 903
Exterior Skin Pattern: Recessed aluminum panel
Exterior Aluminum Gauge: 6063-T5 Aluminum
Colors: Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized)
Warranty: Limited 5-year finish / 1-year material and workmanship
Made of 2-1/8” durable commercial grade aluminum, making it virtually maintenance-free and long-lasting.
Tongue and groove section.
Slanted beveled frame edge design for a classic look.
Reinforcing fin included on all doors.

Steel insulated full-view Doors

All of our Steel Insulated Door models come with the following:
Joint Design: Tongue and groove section with continuous foam thermal break prevents cold or heat from passing through the section
Paint System: 3-stage paint process delivers maintenance free finish that resists rust perforation
Warranty: Limited 10-year paint/ 10-year delamination / 1 year material and workmanship / 1 year hardware

Model 3728/3729

Panel Design: (3728) 2” stucco embossed steel flush steel exterior (3729) 2” thick stucco embossed steel exterior with minor ribbed pattern
Steel Gauge: 27 (.016” min) exteriror; 28 (.015” min)
Colors: White, Glacier White, Chocolate, Mocha Brown, Black, gray, Trinar White,  Almond, Sandtone, Desert Tan, Bronze

Model 3708/3709

Panel Design: (3708) 1-3/8” stucco embossed steel flush steel exterior (3709) 1-3/8” thick stucco embossed steel exterior with minor ribbed pattern
Steel Gauge: 27 (.016” min) exterior; 28 (.015” min)
Colors: Standard White, Glacier White, Chocolate, Mocha Brown, Black, Trinar White,  Almond, Sandtone, Desert Tan, Bronze

MODEL 3208/3209

Panel Design: (3208) 2” stucco embossed steel flush steel exterior (3209) 2” thick stucco embossed steel exterior
Steel Gauge: (.016” min) exterior; 28 (.015” min)
Colors: Standard White, Chocolate, Black, Gray, Charcoal, Trinar White

Model 3158/3159

Panel Design: (3158) 1-3/8” stucco embossed steel flush exterior (3159) 1-3/8” thick stucco embossed steel exterior with minor ribbed pattern
Steel Gauge: 27 (.016” min) exterior: 28 (.015” min)
Colors: Standard White, Glacier White, Chocolate, Black, Gray, Trinar White, Almond, Sandtone, Desert Tan, Bronze. 


Specs/Drawings
Brochures
Springs & Hardware

COMMERCIAL HARDWARE

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

COMMERCIAL TRACK APPLICATIONS

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.  Learn more

COMMERCIAL TORSION SPRINGS

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details